Our equipment and facilities are accessible today during standard business hours following the Easter break.

Spray Extraction Booth


The spray extraction booths in the UNHG07 Print Lab Makerspace are the only place where particulate sprays can be used inside any HCISS-supported buildings. It can be used for spray adhesives, spray paints and fixatives. 


UNHG07University House, Ground Floor, Room G07 – The Makerspace Print Lab 


The spray extraction booths are Class Orange Equipment in the Makerspace, you must complete three sets of inductions to gain access:

  1. The L1 General Induction
  2. The L2 City Makerspaces Induction
  3. The L2 Aerosols Induction

These can be found embedded in your aligned Course Canvas site:

Direct Canvas Link

Your Course > Modules > Compulsory WHS Inductions

Technical Ticket


A P2 mask must be worn when using the spray booth – these are provided, please see the technical staff. Tables can be wheeled into position to improve the workspace for extended periods of use. Gloves, earplugs, and hair nets are recommended for extended periods of use.

Aerosols required PPE
Airbrush required PPE
Updated on April 13, 2023

Was this article helpful?

Related Articles