Scheduled service maintenance outage for the BookingPoint System from 4pm Friday 18th Aug to 12am Sunday 20th Aug, please note no new bookings can be made during this period.
  1. Home
  2. How-To Guides
  3. Post Production Studio Guides
  4. CON222 Setting up a Cue Mix – Guide
  1. Home
  2. Studios & Labs
  3. Post Production Studio
  4. CON222 Setting up a Cue Mix – Guide

CON222 Setting up a Cue Mix – Guide


By default, all headphone outputs will mirror main monitor outputs.

• Setting up a dedicated cue mix is optional and can be done from the Avid S6 Master Touch Module.

There are two headphone amplifiers:

  • A (Located in room CON-222)
  • B (Located in room CON-223)

Step 1

Press the Monitor button on the Avid S6 Master Touch Module. You can use the button or the touch screen.

Step 2

Select either A or B from the Avid Master Touch Module

Tip: Check the Unit ID sticker on the front of the headphone amplifier

Step 3

De-select unused sources from Source Select menu.

Select Cue from the Source Select menu.

Step 4

Press the Home button on the Avid S6 Master

Touch Module to exit the Monitor page.

Step 5

Using the provided CON-222 template, adjust the Cue level to taste in your preferred Digital Audio Workstation (Pro Tools, Logic Pro X, or Live).

Tip: These are Pre-Fader by default.

Example of Pro Tools Session Template

Further Reading

CON222 Start Up & Shut Down CON222 Getting Sound In CON222 Setting Cue Mix CON222 Getting Sound Out

PDFs of these how-to guides are attached below:

Updated on June 29, 2023

Was this article helpful?

Related Articles