The Arduino starter kit is a beginner-friendly electronics kit that includes an Arduino board, various electronic components, and a guidebook, designed to help individuals learn programming and electronics by building interactive projects and prototypes.
Access & Usage
Location: QG04 – Q Building – Prototyping Lab Makerspace
Induction(s) Required:
- Level 1 General Induction
- Level 2 City Makerspaces Induction
These can be found embedded in your aligned Course Canvas site:
Your Course > Modules > Compulsory WHS Inductions
Kit Contents
The Starter Kit includes:
• 1 x Projects Book (170 pages),
• 1 x Arduino Uno,
• 1 x USB cable,
• 1 x Breadboard 400 points,
• 70 x Solid core jumper wires,
• 1 x Easy-to-assemble wooden base,
• 1 x 9v battery snap,
• 1 x Stranded jumper wires (black),
• 1 x Stranded jumper wires (red),
• 6 x Phototransistor,
• 3 x Potentiometer 10kOhms,
• 10 x Pushbuttons,
• 1 x Temperature sensor [TMP36],
• 1 x Tilt sensor,
• 1 x alphanumeric LCD (16×2 characters),
• 1 x LED (bright white),
• 1 x LED (RGB),
• 8 x LEDs (red),
• 8 x LEDs (green),
• 8 x LEDs (yellow),
• 3 x LEDs (blue),
• 1 x Small DC motor 6/9V,
• 1 x Small servo motor,
• 1 x Piezo capsule [PKM17EPP-4001-B0],
• 1 x H-bridge motor driver [L293D],
• 1 x Optocouplers [4N35],
• 2 x Mosfet transistors [IRF520],
• 5 x Capacitors 100uF,
• 5 x Diodes [1N4007],
• 3 x Transparent gels (red, green, blue),
• 1 x Male pins strip (40×1),
• 20 x Resistors 220 Ohms,
• 5 x Resistors 560 Ohms,
• 5 x Resistors 1 kOhms,
• 5 x Resistors 4.7 kOhms,
• 20 x Resistors 10 kOhms,
• 5 x Resistors 1 MOhms,
• 5 x Resistors 10 MOhms
Book Equipment
Equipment is available after required inductions are complete and privileges have been applied to your account.
Store Opening Hours
Day | Open Hours |
---|---|
Monday | 10:00 am – 4:00 pm |
Tuesday | 10:00 am – 4:00 pm |
Wednesday | 10:00 am – 4:00 pm |
Thursday | 10:00 am – 4:00 pm |
Friday | 10:00 am – 4:00 pm |
Weekends | Closed |